Articles tagged with: car repair and maintenance

Know About Basic Car Repair and Maintenance Tips

To keep your car running and performing, here are basic maintenance tips:

1. Be aware of warning lights.

Dashboard lights are installed and blink for a reason. When engine, oil, battery or any other light is on in the dashboard meter, you should probably take it very seriously and get a checkup to find the source of the issue. You can check specialized car repair services in Wollongong via various online resources.

air conditioning vent

2. Regularly service or change the air filter.

The air filter is a very basic yet very critical component for air conditioning & the engine. The air conditioning fan uses the filter to block out dust, and, so does the engine. So its necessary to clean the air filter or replace it accordingly when the need arises

3. External lights.

Exterior lights are a very common reason people get pulled over by the traffic police. Take your time to check signaling, brake lights and head lights on a regular basis. Driving without these lights is dangerous, so make sure you inspect them at least every 45 days.

4. Protect the body and paint job.

Keep up with basic cleaning and waxing of the exterior. Washing the car properly and waxing the body regularly prevents rust from setting n and helps keep scratches down to a minimum.

All About Modern Car Service Tips

There are certain issues relating to the fuel economy that is very common among modern vehicles, and one that is often overlooked even by a reputable mechanic. If you already have a modern car for more than 3 years, you may start to see a significant drop in the performance of your car, and you use more fuel.

You might think that the car needs a good tune-up, and that might be. Ask the mechanic to do this for you, but if you do not see an increase in performance then something else is wrong. What could it be? If you want to get the major car repair services then you can visit various online resources.

spanner used on a car

Modern cars continue to be made more and more fuel-efficient in a number of ways: the car’s body shape, weight, and design of the machine. Each machine has an optimal fuel to air ratio to run most efficiently.

In older cars, a carburetor is a place where fuel is mixed with air. Now that fuel-injected engine and air to fuel ratio is carefully monitored and controlled. If there is too little fuel we say that is running lean and you do not achieve the optimal power. If there is too much fuel we say it is running rich and not all the fuel is burned properly. So the fuel-air mixture is very important to get the best out of your machine.