The dust collector makes cleaning easy and ensures you and your work area are free of dirt and safety risks. If a person has a dust collector on the table, the dust is not inhaled but is collected in a container. You can now get the best dust collector at Euratex.

Sawstop Floating Overarm Dust Collection Review Blacktail Studio

Image Source: Google

Below are some tips on how to make your own dust collector for tables and hoses and vacuum cleaners:-

For the dust collector, you will need a flexible, one-inch wide, 10-foot hose. You will also need brackets and shopping. First, buy a wet and dry vacuum cleaner if you don't already have one. It acts as a dust collector on the table.

You need to determine the most convenient route for your hose. This is determined by the model of your table saw. The hose can run over or under the table. It can also be placed next to the blade. You will then use clamps to secure your tube in place.

Point the hose away from the saw to prevent accidents. Use additional brackets to attach the hose to the table frame or workbench. Guide the hose away from moving parts to avoid injury to the person using the table saw. 

If it gets stuck in any of the parts, it can act as a projectile and injure people working at the desk. Connect the storage hose and nipple together. This can be done directly or with the help of a hose, which is usually equipped with a storage vacuum.

Make sure your hose is straight; Avoid curves and use the shortest possible length. You may be forced to make some adjustments to the hose so that it can be connected directly to the vacuum repair shop.

Leave a reply