Research shows that well-designed hydraulic cylinders, which are manufactured using the best manufacturing process will work well for a lifetime without bothering you a lot. This is possible only if the hydraulic cylinder is subject to regular inspection and maintenance.
You will be aware of the fact that the hydraulic system is complicated and so is maintenance. This article is all about general maintenance required for hydraulic cylinder systems, you can find hydraulic agencies like A.T. Hydraulics.
Checking For Bent Rod And Correcting
Bent rods are very rare in the case of a hydraulic cylinder system because they can be formed only as a result of a design flaw. Common causes for stem diameter rod bent is because of insufficient or irregular mounting arrangement.
Bent rods can also occur because of poor quality materials used to manufacture the hydraulic cylinder system. If the rod is not repaired in time, it can damage the whole system in the long run. Obviously the rod of hydraulic cylinder system should be checked for straightness periodically.
The Ballooning Of Cylinder Tubes
The operating pressure of the hydraulic cylinder has a major impact on a balloon of a cylindrical tube. A bubble tube will lead the way into the braking of the seal and leak fluid.
If this problem is left unattended, the efficiency of the hydraulic cylinder will be down for the most part. Therefore, the cylindrical tube should be checked regularly to ensure maximum efficiency of the system.